Ahead of Formnext 2026 in Frankfurt, where the UK is partner country from 17 to 20 November, the UK additive manufacturing sector faces a question that patent counts cannot answer: who ends up making the parts? Britain helped pioneer industrial mass production and remains a centre of additive manufacturing research, but the companies interviewed describe a harder path from invention to repeat production.
Research strength is measurable
The European Patent Office counted 1,925 international patent families in additive manufacturing originating in the UK between 2001 and 2020, close to France’s 1,938. Additive Manufacturing UK’s 2026 annual plan put the UK market at between £515m and £740m in 2024, equivalent to 3% to 4.3% of the global total. That range reflects disagreement between market estimates. A patent family records an attempt to protect an invention across jurisdictions, while a market estimate can include purchases of machines made overseas. Neither measure shows what share of production takes place in Britain.
Craig Pyser, chair of AMUK and chief executive of AMufacture, considers Britain’s share respectable for an economy of its size. He also recognises the historical complaint that British engineers invent things that others prove more adept at selling. His interest is in what gives a customer a commercial reason to manufacture in Britain. For some buyers, the ability to visit the factory, establish where a part came from and get a replacement quickly already does.
Machines, materials and the location of production
Wayland Additive illustrates both the export strength and the limits of a research-led position. The company grew out of a team with experience of electron beams in the semiconductor industry. In October, a Calibur3 metal additive manufacturing system left its Huddersfield production facility for the University of Innsbruck, where Austrian researchers plan to investigate difficult-to-process materials, including those intended for high temperatures. Britain built and exported the machine, but some of the knowledge of what can be done with it will now accumulate in Austria.
Alloyed, which began in Oxford materials research, licensed a cast nickel alloy to Hitachi Metals in 2018. It later opened component development and production facilities in Abingdon and Seattle, and its Seattle operation sold its first flight parts in 2023. One group of Oxford researchers thus opened three different businesses in licensing alloys, making components in Oxfordshire and supplying American aerospace customers from Seattle. A patent statistic records where an invention originated; a machinist in Abingdon has a more immediate interest in where the next component order goes.
Grant funding ends before commercial questions do
Jake Hand, co-founder of Exeter-based Rapid Fusion, has seen both sides of a grant decision. The company grew out of equipment distributor Evo 3D and now builds large-format additive manufacturing systems. Hand says the business is profitable without R&D funding, while Innovate UK support has allowed it to develop its own technology, work with partners and share costs it would otherwise have carried alone. His criticism concerns the moment a project works: in his view, funders back a project but not a business. The award buys engineering time to solve a defined problem, but a customer also asks whether the machine can make a particular mould, who will train the operator and what happens if the machine stops halfway through a job. Answering those questions for a single sale can take months of a small company’s time.
Innovate UK does offer funding for later-stage R&D, with guidance allowing pre-commercial work such as customer validation, initial tooling and preparation for production. The loan must support an eligible project, and general business costs fall outside its scope. That distinction matters when a company decides whether its next hire should be an engineer to finish development or someone to find and support the first customers. Pyser describes applying for innovation funding as excruciatingly difficult and would like assessors to visit businesses that pass an initial screening. Hand offers a fair rejoinder: some bids are poor, and experience of delivering one project successfully ought to count in an applicant’s favour on the next.
Kingston University offers a fairly good answer for one of Hand’s machines. A graduate named Raghav went to work at Rapid Fusion and insisted that his employer and his old university meet, according to Kingston’s operations manager Lesley Stigling. The result was a £450,000 Zeus robotic cell at the Roehampton Vale campus, combining large-format printing with CNC milling. Kingston can bring work in-house, offer the equipment to industrial partners and teach students on it. The manufacturer has a customer who can show the machine working, and a graduate who knew the equipment and his old department spotted a use for it.
Spin-out equity and the first installation
John Robinson, the University of Wolverhampton’s additive manufacturing research commercialisation manager, incorporated a company in May 2017, and it funded his PhD. In 2024, he says, he and the university filed several patent applications together. His current research includes using more than one material in devices that carry heat away from data-centre equipment. Robinson recalls that the university’s former technology transfer office wanted 75% of the company, while more recent discussions with its enterprise team have been about a potential 10% stake. These were proposals. The first would have left a quarter of the equity for the founder before an outside investor came in, and later financing rounds would dilute that interest further.
The difference is substantial even in a changing sector. The Royal Academy of Engineering and Dealroom found that, among UK deep-tech hardware spin-outs in their sample, the average non-cash stake taken by universities fell from 25% in 2015–19 to 14% in 2024–25, with the 2025 data partial. Robinson’s figures describe one founder’s negotiations, while the national data show that universities have on average been leaving more equity available to engineering founders. Hydra Manufacturing, a University of Leeds spin-out developing equipment for technical ceramics, announced £320,000 in equity investment led by SFC Capital in March. Including earlier grant support, it had secured about £577,000 and was considering raising around £1m or more. Its founder understands why an investor might want to see two more installations, since a customer willing to put a machine on its factory floor gives a stronger signal than an encouraging email. The difficulty is that developing the equipment and winning those customers both consume the capital being raised.
The production base and the training loop
Will Richardson of Wayland points to a constraint that the usual account of commercialisation can miss: without actually doing production, firms do not get good at it. His concern is the limited installed base of industrial equipment in Britain and, in some of Wayland’s markets, the shortage of major customers willing to put work through it. The effect shows up in recruitment. An engineer with a CNC machining background can learn to run an additive system, but in an area with several factories running the equipment, a new employer can recruit someone who has already prepared builds and kept a machine productive. With a small installed base, each firm must do more training itself.
Paul Tickle of Holdson, a British post-processing specialist, sees a difference in recruits who have already used industrial equipment during their apprenticeships. At Wolverhampton, Robinson describes students coming in to redesign a bicycle and print parts for it, while the foundry training centre attracts fewer young people. A university can have an enthusiastic group of student designers and still struggle to produce the people its local manufacturers want to hire. Renishaw’s Ben Deary and Ed Littlewood describe what a company discovers when it tries to bring production back after years of buying overseas: it can commission a machine and hire operators only to find that a supplier it once relied on for a component or service has disappeared. They point to Apex Additive Technologies, a Welsh business helping customers rebuild that expertise by developing process parameters, making first parts and establishing that a process works before the customer takes production in-house.
There is a cost to restarting that learning for every customer. Jason Hutt of Fastech notes that casting is already approved, with customers buying to an agreed specification. An additively manufactured replacement may perform well in material tests and still require evidence specific to the equipment, process and grade that an individual customer has specified. A second buyer may ask for much of the work again, and the bill has to come out of the orders the supplier eventually wins. For a run of fifty parts the arithmetic looks quite different from a run of five thousand. The £38m Airbus-led DECSAM programme brings together Renishaw, GKN Aerospace, Apex, the Manufacturing Technology Centre and other partners, with planned outputs including ground and flight demonstrators and guidance on qualification. That gives suppliers a chance to learn what a major customer will require while processes are still being developed, but a production contract remains a further decision for the buyer.
Demand, procurement and the next customer
Jason Bowes, chief operating officer of CloudNC, offered a blunt comparison at a Manufacturing Technologies Association briefing at the House of Lords on 12 November: it is far easier to sell the company’s technology in the United States than in Britain. CloudNC develops AI-assisted software for programming CNC machines and tests it at its own British factory. A machining business considering the software has a legitimate interest in who has already paid for the mistakes made during development. Hand also finds American buyers more inclined to reinvest after a good year, though a cautious purchasing manager may understand the economics perfectly well. A shop with an uncertain order book must cover the cost of existing machines, and a process that promises a lower cost per part at full utilisation offers little comfort if the buyer can fill only a fraction of the hours.
Pyser estimates that 95% to 98% of AMufacture’s work is now production. The company started in marine, and over the past year defence has become its largest sector, with marine and automotive also significant. Some defence customers revise designs every six to eight weeks, so by the time conventional tooling is ready the drawing may have changed. A local manufacturer able to take the revised file and deliver the next batch can earn repeat orders even while the product keeps changing. Customers bring other costs: an automotive client moving a project into production required someone with at least ten years’ experience in a particular area of delivery, while other buyers expect integration with their own systems, traceability and someone who will answer the phone if a batch fails inspection. Having enough orders to employ the experienced person makes it easier to win the next customer that stipulates the same requirement.
When one customer decided to take some production in-house, AMufacture helped it get the new printer running, and the customer still kept ordering. Two years later, the customer sold AMufacture the machine, because software, staff and post-processing had made the in-house operation more expensive and demanding than anticipated. Measured by the number of firms operating industrial printers, that looks like a retreat. Measured by where the customer’s parts were produced, the work was still in Britain, with a specialist able to spread those costs across several accounts.
James Selka, chief executive of the Manufacturing Technologies Association, told the House of Lords briefing that investment was poised to enter British manufacturing but needed a proper demand signal and co-investment from government. He put energy prices first among immediate obstacles. He also described a buyer prepared to pay more for a component to gain control of delivery and quality, after a cheaper purchase brought its own bill for inspection and rework. Lord Harrington of Watford, chair of Make UK and a former business and industry minister, recalled a limitation of the sector deals pursued under Theresa May: in aerospace and life sciences, companies could put substantial sums alongside public money, while elsewhere some businesses government wanted to encourage could scarcely afford their share. Harrington had chaired GeoPura, a north-east hydrogen power business that tried to raise further capital in Britain and ended up selling to a Canadian company; Ballard Power Systems completed the purchase in August for £275m upfront.
The people developing the next generation of equipment have their own reservation about a shift towards production funding. The team at Added Scientific distinguishes a commercially established single-material process from work on multifunctional devices incorporating several materials in one build. An engineer can already buy printed stainless-steel components, while someone developing a multi-material sensor may still need to establish whether the device works. The first case calls for a buyer willing to specify and accept the part; research funding remains a reasonable answer to the second. In fusion, Harrington acknowledged that he could not give a technical answer on how British manufacturers could take part early enough, but he identified procurement as an important part of the decision. UKAEA’s 2025 order for two additive systems at its Central Support Facility gave a British public institution access to equipment made by international manufacturers: a Freemelt electron-beam machine for work with tungsten and a Nikon SLM laser system supplied by Kingsbury Machine Tools with support from Additure. In separate fusion maintenance projects, UKAEA reports that British participants including Laser Additive Solutions, The Welding Institute and WAAM3D contributed to work on inspection and repair.
The distinction matters to a company like Wayland. A UK laboratory can learn to produce a component on an imported machine, but for a British machine builder the relevant question is when the next equipment specification will be drawn up. For a repair specialist, it is whether development work leads to a contract to maintain the plant. UKAEA publishes a quarterly procurement pipeline so suppliers can see which entries are possibilities over the next one to five years, which are pre-commercial work and which are confirmed requirements expected to go to tender. Even a confirmed tender leaves a considerable distance to a repeat order, and for a supplier contemplating a new facility, that distinction is worth more than a general undertaking to support British industry.
At Portsmouth, the Admiralty could specify the sizes of block it wanted before Brunel’s last set of machines had even been built. A supplier considering equipment for a future fusion plant faces a much less certain timetable. A public customer can tell suppliers which problems it will pay to solve, what evidence it will accept and when it expects to make the next purchasing decision; a manufacturer can then decide whether to hire, invest or pursue better prospects elsewhere. Pyser has his own test for Britain’s appearance at Formnext: an overseas company looking for a European base and choosing to establish it in Britain would count. Smaller decisions will also be worth following up in a year: whether a customer who saw a British-built machine in Frankfurt ordered one, and whether the first installation led to a second. Brunel got his answer in May 1803, when the Admiralty ordered machines for smaller blocks. A year from now, the exhibitors in Frankfurt will have a new set of answers.
