Instruments & Meters

SinceVision Targets Rough-Surface Metrology With Wide-Spot Laser Sensor

The SGI-N030W pairs an expanded laser spot with dual-sensor synchronisation for micrometre-level displacement and battery-electrode thickness measurement.

Zara MahmoudNovember 17, 20265 min read0 views

A concept illustration shows opposed wide-spot laser sensor heads measuring the thickness of a moving electrode web on a production line.

SinceVision has introduced the SGI-N030W, a wide-spot laser displacement sensor designed for high-speed, non-contact dimensional measurement on rough, textured and irregular surfaces. The sensor uses an expanded laser spot and optical triangulation to address instability that conventional point-spot systems can encounter when surface finish varies. SinceVision is positioning the product within its SGI Series for applications in lithium-ion battery manufacturing, semiconductor processing and precision mechanical engineering where micrometre-level measurement is required.

Wide spot versus point spot

Conventional point-spot laser displacement sensors concentrate reflected energy in a small area. That makes readings sensitive to microscopic features such as scratches, grain boundaries, brushed textures and matte finishes, according to the company. Such features can create signal variations that the system may interpret as dimensional change, potentially producing false defect warnings and extra inspection.

The SGI-N030W instead collects reflected light across a broader area. By averaging local microscopic peaks and valleys before signal conversion, the design is intended to reduce the effect of surface roughness and optical scattering. SinceVision cites drawn metals, sandblasted surfaces and coated battery foils as materials that can benefit from the wider spot.

Measurement specifications

The sensor has a 30 mm reference distance and a ±5 mm measurement range. SinceVision specifies repeatability of 0.05 µm on a diffuse white target under static conditions, and linearity of ±0.02% of full scale across the range. Sampling runs at 50 kHz, equivalent to a 20 µs update interval, for high-speed monitoring of dynamic processes.

Communication options include RS485, 100Base-TX Ethernet and switchable analogue outputs for 4–20 mA current or 0–10 V voltage signals. Master-slave synchronisation lets two sensors operate in opposition, measuring from either side of a component or moving material.

Battery electrode thickness

One primary application is in-line thickness measurement of lithium-ion battery electrodes. Coating thickness and uniformity affect energy density, internal resistance and long-term cell stability. Offline checks with contact micrometers or drop indicators can introduce operator variability and potentially deform wet or uncured electrode material, while periodic spot measurements do not provide continuous coverage across a production reel.

The proposed arrangement uses two synchronised sensors above and below a moving electrode web. Mounted on a calibrated, low-thermal-expansion marble gantry, the opposing heads measure clearance to the material. A controller combines those readings with the fixed mounting datum to calculate absolute electrode thickness in real time.

SinceVision says production trials demonstrated stable, repeatable measurement within ±0.3 µm at a web speed of 300 mm/s. The 50 kHz sampling rate provides longitudinal resolution intended to detect localised coating agglomerations, edge thinning and exposed substrate before the electrode proceeds to cell winding.

Semiconductor and motion applications

The sensor is also aimed at semiconductor manufacturing, where non-contact measurement is important for sensitive wafer surfaces. Potential uses include wafer position verification, edge detection, height measurement and checks on wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems.

In precision assembly, the SGI-N030W can monitor voice coil motors, linear actuators and micro-steppers. Its sampling rate supports capture of transient displacement, mechanical oscillation, settling behaviour and end-stop overshoot across the full range. Position data can be sent to machine control systems through the Ethernet interface for real-time monitoring and process control.

Surface-related errors

Jack Li, Global Sales and Marketing Director at SinceVision, said surface texture remains a recurring source of false defect warnings in battery manufacturing and precision assembly. According to Li, point-beam sensors can read microscopic scratches and rough coatings as actual thickness variations, slowing production lines and creating demand for manual inspection. He said the wider optical spot is intended to average out these surface-related variations, while synchronisation between opposing heads supports high-speed thickness verification.