Large components do not always require a large CNC machine tool, according to Fives High Precision Machines (Fives HPM). Its Liné Machines RoboTDM is a high-precision robotic machining solution for workpieces that need tolerances down to approximately 0.1 mm, where a full CNC machine may add cost and footprint beyond the application's needs.
The system equips an industrial robot with a specialized end effector carrying a spindle, toolholder and cutter. Instead of bringing the entire component into a large machine envelope, RoboTDM brings material removal to the workpiece. Fives says this approach can shorten setup, simplify programming and support direct milling, trimming and drilling on large parts.
Potential operations include face milling and deburring, such as removing burrs from castings and trimming excess weld beads. The system can also drill pilot holes in large aerospace panels or automotive body parts, and perform trimming, routing, drilling, edge contouring and pocketing on large composite or thermoplastic fabrications.
Fives reports that a multiyear research and development project and development trials demonstrated cycle-time reductions of up to 70% in trimming and milling, with some individual applications achieving greater savings. These are company-reported results from development work, not a guarantee of performance in every production setting.
Conventional industrial robots have typically achieved positional tolerances of around 0.3 mm, which Fives says is insufficient for many machining tasks. The RoboTDM development focused on closing that accuracy gap through high-precision robotic machining. Robot calibration, look-ahead and motion-planning algorithms allow programs containing more than one million points to be processed without latency that could compromise motion, the company says. Fives adds that this produces smoother trajectory execution and supports multi-axis contouring and complex operations more closely comparable with CNC machining.
RoboTDM can reduce machining deviation up to 100 μm (0.1 mm), which Fives describes as a threefold improvement over conventional robotic accuracy. That broader accuracy range is central to the system's positioning: it extends robotic machining to applications that previously fell outside conventional robot capability, while remaining short of the tightest CNC work.
Configurable machining package
The end effector can be configured with different spindle sizes, power ratings, torque and speed. Available systems can provide spindle power up to 125 kW, torque up to 80 Nm and speeds reaching 30,000 rpm, with HSK A63, HSK F63 or HSK A100 taper toolholders. RoboTDM can also incorporate automatic tool changing, tool measurement, tool-breakage detection and part probing, while a vision system can support drilling. The platform can be configured for waterjet cutting, laser profiling and ultrasonic cutting as well as machining.
Physical flexibility is another part of the proposition. RoboTDM can be set up with multiple workstations and customized peripheral equipment, and its relatively modest foundation requirements simplify installation compared with a large CNC machine tool, according to Fives. The company sees particular potential in aerospace, defense, maritime and energy, where component dimensions can be substantial and production requirements vary.
Fives is explicit about the limits. Where tolerances tighter than 0.1 mm are necessary, a high-precision CNC machine remains the appropriate choice. RoboTDM is therefore complementary to Liné Machines' and the wider Fives HPM portfolio rather than a universal replacement.
Customer-driven development
Fives says RoboTDM originated from customer requirements and reflects its approach of engineering around specific manufacturing challenges rather than forcing applications to fit standard equipment. The product also illustrates the company's precision at scale cross-brand message, with Liné Machines contributing expertise in large-scale milling and material removal under the unified Fives HPM banner.
Fives Liné Machines Inc., now part of Fives HPM, has had a facility in Granby, Quebec, Canada, for almost 50 years. The plant produces Liné CNC machine tools and robotic solutions, including RoboTDM, and provides support activities covering engineering, integration, automation, service and training across equipment lifecycles. For the right component, Fives says, the robotic approach can mean lower capital investment, simpler installation, greater flexibility and shorter cycle times.
