Industrial Machinery

Commercial RO and Dosing System Checklist: 8 Steps Before You Sign

A procurement checklist for commercial RO water treatment, dosing systems, filter presses, and pumps, based on costly specification mistakes and a pre-PO review.

Zahra QureshiNovember 1, 20265 min read5 views

This checklist is for procurement managers, plant engineers, and distributors specifying a commercial RO water treatment system, dosing package, or dewatering line. I handle water treatment equipment orders at Hangzhou Dinghui, and I've personally made - and documented - six significant specification mistakes. This is the pre-PO list I now use to keep other people from repeating them.

If you only need a small point-of-use RO water purifier, this is overkill. This is for commercial reverse osmosis water purification systems, RO water equipment, RO water skids, water RO plant machines, and the dosing and dewatering equipment around them.

One example. In 2020, I approved a 20 m3/h RO skid using a raw water analysis from the dry season. Commissioning landed in the wet season. Turbidity spiked, pretreatment clogged, and we lost two days plus about $1,200 in labor and replacement media. Not ideal. The lesson: check seasonal water, not one sample.

Who this checklist is for

Use it when you're comparing a reverse osmosis machine for sale, a reverse osmosis system for sale, a commercial RO unit, a water purification machine for sale, or a full water equipment package with pretreatment, dosing, and sludge handling. It also works for boiler chemical dosing systems, chemical dosing systems for cooling towers, and chemical dosing system in HVAC projects - the process details change, but the review logic is the same.

The 8-step pre-PO checklist

  1. Lock the water source and target quality first

    Get a full raw water analysis: TDS, hardness, turbidity, SDI, chlorine, iron, manganese, silica, COD, pH, temperature, and flow. Then get it again in the opposite season. Define permeate quality, recovery, and reject stream. If the target is vague, every reverse osmosis water treatment quote - and every reverse osmosis purification system proposal - will be vague too.

  2. Draw the full process train, not a product name

    List pretreatment (quartz sand filter, carbon, softener, UF skid), RO skid, RO plant chemical dosing, post-treatment, and waste handling. Clarify whether you're buying a commercial reverse osmosis system for sale, a reverse osmosis unit, or a water filter machine. The words matter less than the scope split.

  3. Size for peak demand and turndown

    Check high pressure water pump curves, motor rating, VFD, standby, and drain capacity. For dosing, check the automatic chemical dosing pump turndown, calibration range, and control signal. If you need an outdoor sump pump or DC water pump, confirm IP rating and duty cycle. Don't buy an industrial dosing pump on chemical dosing pump price alone. As of January 2025, verify current pricing and lead time in writing.

  4. Check materials and chemical compatibility

    Confirm wetted parts, membranes, pressure vessels, gaskets, and dosing chemical for RO plant compatibility. The same review applies to boiler dosing chemical, coagulant dosing system, and PAC dosing system water treatment. A compatible pump with the wrong elastomer is still the wrong pump.

  5. List the instruments and interlocks

    Require conductivity, ORP, pH, flow, pressure, level, and leak detection. For an automatic chlorine dosing system or chlorine dosing system in water treatment plant, specify the dosing point, analyzer, and fail-safe. Ask who calibrates the sensors and what spare sensor ships with the unit.

  6. Design the dosing system around the injection point

    Day tank, secondary containment, mixing, residence time, injection quill, backpressure valve, and maintenance access. What most people don't realize is that most dosing problems are mixing and control problems, not pump problems. A good dosing pump for water treatment plant - or any dosing pump water treatment package - can still fail if the injection point is wrong.

  7. Solve waste and sludge before you buy a filter press

    Map the water sedimentation tank, final settling tank wastewater treatment, DAF filtration systems, and filter press in wastewater treatment. Compare plate and frame filter press, plate frame filter press, and belt filter press against sludge volume, cake dryness, and filtrate return. People think filter press size drives cake dryness. Actually, feed solids, conditioning, and cycle time drive it. Confirm filter press equipment, filter press filters, spare cloths, and effluent treatment plant machinery interfaces.

  8. Pin down documents, tests, and exclusions

    Get a scope with exclusions, utility requirements, installation and commissioning, training, spare parts list, warranty, and a performance test. Ask for CE, ISO 9001 scope, and NSF/ANSI 61 where applicable - and check the certificate holder and validity date. A certificate on a brochure is not the same as a certificate for the equipment you're buying.

What I check before releasing the PO

Even after I approved the second vendor, I kept second-guessing. What if their membrane array was undersized? I didn't relax until the 72-hour performance test held recovery and conductivity. So I keep five questions on the front of the file:

  • Is the raw water data seasonal and complete?
  • Does the scope show every interface, including reject and sludge?
  • Are pump and dosing turndown points written as numbers?
  • Is there a performance test with pass/fail criteria?
  • Are spares and calibration items priced into year one?

Common mistakes I still see

Sizing on average flow. Using one water sample. Accepting 'standard lead time' without asking what buffer is inside it. Buying a dosing pump on price and paying later in maintenance. Forgetting drain capacity for the RO reject. Leaving filter press cake handling out of the scope. Skipping the spare parts list. And treating a performance test as a nice-to-have.

An informed buyer asks better questions and gets a faster, cleaner quote. That's the whole point of this checklist.