Hardware & Tools

Bambu Teases Mixed Nozzle Sizes and 2.85mm Filament for H3C 3D Printer

A teaser image of a multi-part watch hints that the H3C can combine 0.2mm and 0.4mm nozzles and run 2.85mm TPU in a single print, which current Bambu dual-nozzle models cannot do.

Zahra QureshiNovember 1, 20265 min read7 views

A multi-nozzle print head deposits different materials onto a watch model on a 3D printer build plate.

Bambu has been revealing features of its new H3C 3D printer one at a time. After teasing multi-color printing, the company has now released an image and a short video that point to multi-nozzle and multi-filament compatibility, including the ability to use different nozzle sizes within a single print.

The teaser centers on a multi-component watch. According to the report, the pictured setup pairs:

  • a 0.4mm nozzle with 1.75mm filament for the rigid case;
  • a 0.2mm nozzle with 1.75mm filament for fine detail;
  • a 0.4mm nozzle with 2.85mm filament for a soft strap that the article tentatively identifies as TPU.

Two signals in one image

The first takeaway is filament diameter. Bambu appears to be adding 2.85mm filament support aimed at soft, rubbery materials such as TPU, alongside the 1.75mm filament its printers commonly use.

The second, and more significant, is nozzle mixing. The image implies that a 0.2mm nozzle and a 0.4mm nozzle can be used in the same job, most plausibly in a print containing multiple objects. Such a setup would let one job combine large structural parts with fine details without swapping nozzles.

Why that matters

Users have asked for this capability on Bambu's dual-nozzle machines, including the H2D and H2C and, the article suggests, the newer X2D. According to the article, Bambu's software does not currently allow a 0.4mm and a 0.2mm nozzle to be combined in one print; only a single nozzle size can be selected. The teaser therefore points to a software and workflow change as much as a hardware one, though the company has not explained how the limitation is being lifted.

Open questions

It is not yet clear whether mixed nozzle sizes will reach all compatible Bambu printers or be reserved for the upcoming flagship H3C and the smaller P3C. That raises a question the article poses directly: whether Bambu intends to use the feature to drive sales of new machines or to extend a long-requested capability to existing owners.

The P3C has not been formally announced; only the H3C has been teased. Even so, the article sees no obvious reason the smaller model would lack the same multi-nozzle and filament-size support.

An update to the report notes that the teaser video shows watch components printed in place as a single part using multiple nozzle and filament sizes. Bambu has not published confirmed specifications, pricing or availability for the H3C, and the mixed-nozzle capability remains a teaser claim rather than a demonstrated, shipping feature.